- 熱工儀表
- 壓力儀表
- 流量?jī)x表
- 物位儀表
- 轉速儀表
- 調節閥門
- 執行機構
- 智能顯示
- 信號隔離
- 儀表盤柜
- 儀表電纜
- 儀表配件
- 電流電壓
- 進口儀表
- 倍西儀表

| Q96D-MΩA雙路交流電網絕緣監測儀
Two-way AC Insulation Monitor
特性 Characteristics ·監測500V以下交流電網的絕緣電阻Monitoring the insulation resistance at the AC network system below 500V. ·當電網絕緣電阻低于設定值時輸出----報警信號 To output alarm signal will generate if the resistance lows then the set value ·偏轉角 Deviation:90度 ·環境溫度Ambient temperature range:-25℃ to+55℃ ·外殼防護Housing protection:IP42 ·耐振動Vibration strength:0.7g ·準確度等級Accuracy:1.5 ·額定電壓Rated voltage:Un±15%( Un:220V,380V) ·電源消耗Power consumption:≤5VA ·重量Weight:1.1kg ·報警精度Accuracy of alarm:10KΩ±20%,30 KΩ±20%,60KΩ±20%,100KΩ±20% 200KΩ±20%,300KΩ±20%,500KΩ±20%,1MΩ±20% ·開關容量Load of switch:250Vac,5A
接線示意圖 Connection diagram:
儀表背部接線示意圖
儀表外形圖 儀表開孔尺寸 Cut out:92+0.5×92+0.5mm
測量范圍 Measuring range
注Note:報警點的設置亦可根據用戶要求進行,如需要請?jiān)诤贤凶⒚鳌?/span> |









