- 熱工儀表
- 壓力儀表
- 流量儀表
- 物位儀表
- 轉速儀表
- 調節閥門
- 執行機構
- 智能顯示
- 信號隔離
- 儀表盤柜
- 儀表電纜
- 儀表配件
- 電流電壓
- 進口儀表
- 倍西儀表

| 相序指示器
Phase Sequence Indicator
特性 Characteristics ·用于三相電網的相序指示Indication of phase sequence for three phase network ·環境溫度Ambient temperature range: -25℃ to+55℃ ·外殼防護Housing protection:IP42 ·耐振動Vibration strength:0.7g ·工作電壓(相一相)Voltage(Phase to phase):190~440Vac ·頻率Frequency:50…60HZ ·電源消耗power consumption:≤2VA
產品分類Table
使用說明Directions User should properly connect according to figure I while using Theis product. 2、當接通電源后,各相所對應的指示燈點亮,如有缺相時對應此相的指示燈會熄滅,且正序與逆序指示燈同時點亮 When connected to the power,the lamp indicate to the related phase should be lighten,If one phase lose,the related lamp will Be dark,meanwhile the RF correct/RF false lamp is lighten. 3、當接入相線為正序時,正序指示燈點亮,反之,則逆序指示燈點亮。 When the power is in correct phase sequence,the RF correct Lamp is lightened,otherwise,the RF false lamp is lightened. 4、各指示燈關系見表Each lamq information see table.
|











